IR REMOTELY CONTROLLED DIMMER (K6712)Part Number: K6712
Price: $63.90
1 IN STOCK
Together with the 15 channel transmitter (K6710) this receiver allows you to remotely dim lights. With a single channel transmitter you can remotely control up to 15 dimmers (15 x K6712). The dimmer has two memories to preserve distinct dim presettings and in addition you can make a given dimmer insensitive to a certain memory, which can be handy when you use several dimmers in the same room. To complete the whole, the dimmer is equipped with an adapted front plate, allowing easy building-in. The dimmer can also be operated locally by means of a push button. If required you can also set the receiver so as to make it only adopt the on or off state, in order to make it suitable for switching inductive loads such as halogen (with transformer) or neon lamps.
Specifications
Parts List
Hints
If the supply voltage is 110V, you must fit a 1uF (min 200V) capacitor for C13.
Together with the 15 channel transmitter (K6710) this receiver allows you to remotely dim lights. With a single channel transmitter you can remotely control up to 15 dimmers (15 x K6712). The dimmer has two memories to preserve distinct dim presettings and in addition you can make a given dimmer insensitive to a certain memory, which can be handy when you use several dimmers in the same room. To complete the whole, the dimmer is equipped with an adapted front plate, allowing easy building-in. The dimmer can also be operated locally by means of a push button. If required you can also set the receiver so as to make it only adopt the on or off state, in order to make it suitable for switching inductive loads such as halogen (with transformer) or neon lamps.
Specifications
- Suppressed triac output: 2A or 440W at 220V
- Can be set for:
Switchover output (on/off)
Pulse output (on as long as you press)
Dimmer output (to be used only with bulbs)
- Four identification codes
- Fifteen channel codes
- Two memories for preserving two dim states or on/off
- Push button for local operation
- Power supply 220 VAC or 110 VAC (*)
| Label | Artnr | Qty | Description |
| C1,C2 | C18 | 2 | 18pF CERAMIC CAPACITOR |
| C10 | 47J0C | 1 | ELCO PCB 47µF-16V |
| C11 | 100J0C | 1 | ELCO PCB 100µF-16V |
| C12 | SI10N0 | 1 | SIBATIT 10nF-63V |
| C13 | .47/4/P | 1 | PRINT-C MKT 470nF/400VDC |
| C14 | .1/4/P'PHS | 1 | MKT-C 100nF/400V pitch:15mm |
| C3 | C3N9 | 1 | 3.9nF CERAMIC CAPACITOR |
| C4 | C47N0 | 1 | 47nF CERAMIC CAPACITOR |
| C5 | C100N0M | 1 | 100nF CERAMIC MULTILAYER CAPACITOR |
| C6 | 2J2J | 1 | ELCO PCB 2.2µF-50V |
| C7 | 4J7J | 1 | ELCO PCB 4.7µF-50V |
| C8, C9 | 10J0E | 2 | ELCO PCB 10µF-35V |
| D | BP104 | 1 | BP104 IR RECEIV. WITH FIL |
| D1 | 1N4148 | 1 | 1N4148 (1N914) |
| D2 | 1N4007 | 1 | 1N4007 DIODE 1A-1000V |
| IC1 | MC3373 | 1 | MOT REMOTE CONTROL PREAMPLIFIER |
| IC2 | VK6713 | 1 | MICRO PROC. |
| J1 | SCREW04 | 1 | SCREW CONNECTOR PCB 4 CONT. (CMM5/4) |
| L1 | 4700H0 | 1 | HF-CHOKE 4700µH |
| L2 | SELFDEP |
1 | DEPARASITE SELF 50µH/1 KHZ - 26mOhm |
| R1 | RA1K0 | 1 | RESISTOR 1/4W 1K |
| R10, R11 | RA470K0 | 2 | RESISTOR 1/4W 470K |
| R12 | RA820E0 | 1 | RESISTOR 1/4W 820E |
| R13, R14 | RC100E0 | 2 | RESISTOR 1W 100E |
| R2 | RA39K0 | 1 | RESISTOR 1/4W 39K |
| R3 | RA47E0 | 1 | RESISTOR 1/4W 47E |
| R4 | RA270E0 | 1 | RESISTOR 1/4W 270E |
| R5 | RA100K0 | 1 | RESISTOR 1/4W 100K |
| R6...R9 | RA4K7 | 4 | RESISTOR 1/4W 4K7 |
| SW | KRS1243 | 1 | KRS-1243 TACT SWITCH 12X12mm |
| T1 | BC547B | 1 | BC547B SI-NPN UN 50V-0.2A |
| T2 | BC557B | 1 | BC557B SI-PNP UN 50V-0.2A |
| TR1 | Q6004F31 | 1 | TRIAC 4A 600V Igt 10mA TO202AB TECCOR |
| X1 | X4 | 1 | X-TAL 4.000000 MC -- HC-49/U |
| ZD1 | ZB6V2 | 1 | ZENER DIODE 6V2-1.3W |
| 18P | 18P | 1 | 18P DIL IC SOCKET 300MIL |
| 8P | 8P | 1 | 8P DIL IC SOCKET 300MIL |
| ALU6712'1 | ALU6712'1 | 1 | ALUMINIUM FRONT |
| BT29250 | BT29250 | 2 | SCREW PHILLIPS 2.9 X 25mm DIN7982 |
| BUS05 | BUS05 | 6 | 5mm PLASTIC SPACER |
| BUS1 | BUS1 | 3 | 10mm PLASTIC SPACER |
| BV30350'* | BV30350'* | 3 | SCREW COUNTERSUNK-HEAD 3X35mm |
| J | DBL | 4 | JUMPER |
| F6712'1 | F6712'1 | 1 | POLY. FRONT |
| H6712'1 | H6712'1 | 1 | MANUAL |
| MR3 | MR3 | 6 | NUT M3 |
| P6712P'1 | P6712P'1 | 1 | PROCESSOR PCB |
| P6712S'1 | P6712S'1 | 1 | SHIELD PCB |
| P6712T'1 | P6712T'1 | 1 | TRIAC PCB |
| PLUG6 | PLUG6 | 2 | PLASTIC PLUG FOR WOODSCREW NR6 |
| RM3K | RM3K | 3 | GROWER M3 (DIN6798AZ) |
Hints
If the supply voltage is 110V, you must fit a 1uF (min 200V) capacitor for C13.
Other Related Products: