TP-100 - Jack IdentifierPart Number: TP-100
Price: $25.50
1 IN STOCK
| This tester is designed to aid network technicians and MIS personnel in the identification of the equipment connected to modular jacks found throughout the work place. The TP100 aids in determining what type of equipment is connected to the other end of a wall plate or cable by being able to detect cable terminators on all 4 pairs of a T568A/B wired jack or plug. TP100 is also able to detect voltage on the center pair. It does not get any easier than this. Connect clear colored plug of cable provided into the top of the TP100. The transparent blue plug is a universal plug suitable for use on 2 through 8 position modular jacks (RJ11, RJ12, and RJ45). LED Indicators: Terminator detected LEDs A LED will light for each pair that is terminated to a NIC or hub at the other end of the cable. Two or more LEDs being lit usually indicates a data network jack. Voltage detected LEDs. One of the two LEDs will light to indicate presence of a DC voltage on the middle pair. The NORM LED will light if the polarity is correct for an analog phone line. The REV LED will light for the opposite polarity. Usually the jack is an analog or digital phone line if one of these LEDs lights. If both are on at once, the voltage is AC. Labeling shows common terminator configurations for a few network standards. NIC's capable of a 100Mbits usually have all four pairs terminated. View into RJ jack shows pin assignments. Horse shoe shapes above the connector outline shows pairing of DATA lines monitored for terminators. The single horse shoe in the middle of the connector outline is the pair monitored for voltage. Click Here to view Manual |
Other Related Products: