LIQUID LEVEL CONTROLLER (K2639)Part Number: K2639
Price: $25.98
2 IN STOCK
Kit - Assembly Required
Did you forget to turn off the tap? Is the washing machine leaking? Will the aquarium level go too low? Has the rain water butt overflowed? Do you have water in the cellar? Just a minor mishap, or a disaster! You can avoid all this by installing the liquid level controller in the right way and in the right place. -Level indicator: three led's are used to indicate 'LOW LEVEL', 'MEDIUM LEVEL' and 'HIGH LEVEL'. -Level controller: the relay switches automatically a pump and/or valve on and off to keep the level between 'LOW' and 'HIGH'. -Alarm : an 'alarm' signal is available to indicate 'wet' or 'dry'. Some applications may demand a siren, or perhaps a bell or a lamp may be more suitable. It is possible to replace the liquid sensors with other sensors, e.g. temperature or light dependent resistors (NTC/LDR) and thus use the device as a temperature/light controller. Computer interfacing is also possible utilising input card or interface card K8000
Specifications
Parts List
Kit - Assembly Required
Did you forget to turn off the tap? Is the washing machine leaking? Will the aquarium level go too low? Has the rain water butt overflowed? Do you have water in the cellar? Just a minor mishap, or a disaster! You can avoid all this by installing the liquid level controller in the right way and in the right place. -Level indicator: three led's are used to indicate 'LOW LEVEL', 'MEDIUM LEVEL' and 'HIGH LEVEL'. -Level controller: the relay switches automatically a pump and/or valve on and off to keep the level between 'LOW' and 'HIGH'. -Alarm : an 'alarm' signal is available to indicate 'wet' or 'dry'. Some applications may demand a siren, or perhaps a bell or a lamp may be more suitable. It is possible to replace the liquid sensors with other sensors, e.g. temperature or light dependent resistors (NTC/LDR) and thus use the device as a temperature/light controller. Computer interfacing is also possible utilising input card or interface card K8000
Specifications
- Power supply : 12 to 14 V AC/300mA min. or 16 to 18 V DC/100mA min.
- Supply current : 80 mA max.
- Relay output : 240V/3A max.
- Dimensions : P.C.B. : 104 x 60 x 29mm / sensors : 104 x 25 x 1.5mm
| Label | Artnr | Qty | Description |
| C1...C8 | SI100N0 | 8 | SIBATIT 100nF-63V |
| C10 | 1000J0D | 1 | ELCO PCB 1000µF-25V |
| C11 | 7MK22 | 1 | MKH 0.022µF-400V |
| C9 | 10J0E | 1 | ELCO PCB 10µF-35V |
| D1...D5 | 1N4148 | 5 | 1N4148 (1N914) |
| D6 | 1N4007 | 1 | 1N4007 DIODE 1A-1000V |
| IC1 | LM324D | 1 | SAM LM324N QUAD OPAMP LOW POWER DIL 14 |
| J | DBL | 2 | JUMPER |
| LD1, LD3 | LED5RL | 2 | LED 5MM RED 2.0MCD TD UNIVERSAL |
| LD2 | LED5GL | 1 | LED 5MM GREEN 6.0MCD TD UNIVERSAL |
| LD4 | LED5YL | 1 | LED 5MM YELLOW 3.9MCD TD UNIVERSAL |
| R1, R22 | RA1M0 | 2 | RESISTOR 1/4W 1M |
| R12...R15 | RA680E0 | 4 | RESISTOR 1/4W 680E |
| R16,R17 | RA68K0 | 2 | RESISTOR 1/4W 68K |
| R18...R20 | RA4K7 | 3 | RESISTOR 1/4W 4K7 |
| R2...R11 | RA47K0 | 10 | RESISTOR 1/4W 47K |
| R21 | RA12K0 | 1 | RESISTOR 1/4W 12K |
| RY1 | SRU-12 | 1 | SRU-S-112D RELAY 1XINV 12VDC 3A |
| T1 | BC547B | 1 | BC547B SI-NPN UN 50V-0.2A |
| VR1 | UA7812 | 1 | UA7812 1A-12V TO-220 |
| 14P | 14P | 1 | 14P DIL IC SOCKET 300MIL |
| H2639 | H2639 | 1 | MANUAL |
| P2639 | P2639 | 1 | PCB |
| PRINTPZ | PRINTPZ | 2 | 10 PCBTABS |
Other Related Products: