PROTEK 20MHz Dual Trace Oscilloscope w/Alt-Mag (PROTEK 6502)
Price: $289.00
18 IN STOCK
20MHz Bandwidth
Alt-Mag sweep for
simultaneous
display of main
and X5 magnified
trace
1mV/Div Vertical
sensitivity
Alternate trigger
for a stable display of
unrelated signals
X5 Sweep Magnification
Large 6” CRT
Autofocus
TV Sync: Stable TV signal observation
Internal Sync separator circuit for stable
triggering on video signals
Lightweight with low power consumption
Supplied with 2 (X1, X10) probes and manual
View Product Specifications CRT;
Acceleration Voltage : 1.9KV
Valid Area : 6 inch (8 x 10 div) (div ~10mm)
Vertical Deflection;
CH1, CH2 Sensitivity: 5mV/div~5V/div(1-2-5 STEP,10RANGE)(±3%)1mV/div~1V/div (x5MAG)±5%
Input Coupling: AC-GND-DC
Bandwidth: DC : DC ~ 20MHz / AC : 10Hz ~ 20MHz
Elevation Time: About17.5ns
Input Impedance: 1M Ohm±2%, 25pF±3pF
Maximum Input Voltage: 400V(DC+AC peak)/ CH1 : Only Channel 1 / CH2 : Only Channel 2 / ADD : Addition of two signals(CH1+CH2) / DUAL : Simultaneous Channel 1,2 Operation
Overshoot: Under 50%
Horizontal Deflection;
Sweep Mode: A, XY, ALT, MAG, x10 MAG
Sweep Time: 0.1µs/div ~ 0.2 sec/div ±3% 1-2-5 STEP(x1), 20 RANGE
Sweep Expansion: 0.1µs/div ~ 0.2s/div(x10MAG±5%0.1µs/div UNCAL)
Triggering;
Trigger Mode: AUTO, NORM, TV-H, TV-V
Trigger Source: INT, CH2, LINE, EXT
Trigger Coupling: CH2
Sensivity NORM: (A) (INT) DC-5MHz : 2 div.20~40MHz : 3 div. / (B) (EXT) DC-5MHz : 200mV 20~40MHz : 300mV
TV Synchronization: INT : 1 div / EXT : 1Vp-p
X-Y MODE;
Operation Mode: When X-Y Operation, CH1-X axis, CH2-Y axis
Input Impedance: 1MOhm ±2% 25pF
Frequency Characteristics: DC ~ 500MHz,Phase Difference DC ~ 50KHz 3°
Z axis;
Input Impedance: 33K Ohm
Max. Input Voltage: 50V (DC+AC peak) MAX AC 1KHz
Bandwidth: DC ~ 2MHz
Input Signal: +5V(POSITIVE INPUT)
CAL Voltage: 0.5V, Sine wave, 1KHz
Operation Voltage: AC110V, 120V, 220V, 240V ±10% 50/60Hz
Dimension: 13.4(W)x 5.6(H) x 15(D)in.
Accessories: Power Cord 1EA, Fuse 2EA, Probe 2EA,
Manual 1EA
View Product Specifications
Specifications: