Standard Tip Conductive Pen (CW2200STP)
Price: $24.00
11 IN STOCK
| 1+ | 10+ |
| $24.00ea. | $21.00ea. |
The pen dispenser for drawing highly conductive silver traces, jumpers and shielding with precision and control
- Quickly creates conductive silver traces on most surfaces
- Valved pen tip for easy application
- Solderable at low temperatures
- Dries in minutes at room temperature
Applications:
- Repairs traces
- Links components
- Makes smooth jumpers
- Shields electronics
INSTRUCTIONS,
- clean surface to be repaired
- tap the top of the pen on a hard surface to free the mixing balls. Shake the pen vigorously for 20 seconds to mix the material
- practice with the pen before trying a repair. Press the pen lightly against surface to be repaired. Squeeze barrel firmly to start & regulate the flow.
- trace will become conductive in 5-10 minutes. Air cure is reached in 45 minutes; heat cure in 5 minutes at 250-300 deg F for maximum conductivity
- wipe pen tip clean after each use & replace the cap
- use item # CW3300 Overcoat Pen to insulate repaired trace and to repair any damaged solder mask
