1-Part Adhesive Sealant

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA regulations apply. Reference CDS4319 "Food Contact Applications", "Silicone Rubber Compounds."

Specifications:

Use: Adhesive Sealant
Special Feature: High tensile strength
Standards:

FDA 21CFR 177.2600
MIL-A-46106
UL Recognized
^{UL File No. E-36952}
^{UL 94 HB}

NSN: 8030-01-014-5369
Cross Reference: RTV 102, DC 732
Uncured Properties:

Consistency: Paste
Color: Translucent
Specific Gravity: 1.05
Tack Free Time: 20 min
Cure Through Time ( 77°F / 50% relative humidity / 1/8" thick): 7 days
Cure Time (@ 77°F /50% relative humidity): 3 days
Useful Temp. Range: -75°F to 400°F (-60°C to 205°C)

Cured Properties - MECHANICAL:

Hardness: 30 (Shore A)
Tensile Strength: 2.8 kg/cm² (400 psi)
Elongation: 450%
Tear Strength: 8 kg/cm (45 lb/in)
Peel Strength: 7 kg/cm (40 lb/in)

Cured Properties - ELECTRICAL:

Volume Resistivity: 3 x 10¹⁵ ;ohm · cm
Dielectric Strength: 20 kV/mm (500 V/mil)
Dielectric Constant: 2.8 @ 60 Hz

Cured Properties - THERMAL:
Thermal Conductivity: 0.5 x 10^-4 cal/sec/cm²
Brittle Point: -75°F (-60°C)
Thermal Expansion: 7 x 10^-5 (°C)^-1
Other:

Viscosity (@ 25°C): 400 g/min

Material Safety Data Sheet (MSDS)

1-Part Adhesive Sealant - RTV108-300ML