1-Part Adhesive Sealant

Excellent for thin section potting, filling small surface voids, self leveling protective coatings. Will flow into small crevices and hard to reach places. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA 21 CFR 177.2600 regulations apply. Reference CDS4319 "Food Contact Applications", "Silicone Rubber Compounds."

Specifications:

Use: Adhesive Sealant
Special Feature: High Performance
Standards:

FDA 21CFR 177.2600
MIL-A-46106, group 1, type 2
UL File No. E-36952

Cross Reference: RTV112
GE Silicone NSN #:

8040-00-522-3429
8040-00-880-7332
8040-01-132-7679
8040-00-880-7332

Uncured Properties:

Consistency: Flowable
Color: Clear
Specific Gravity: 1.05
Tack Free Time: 20 min
Cure Time (77°F /50% relative humidity): 7 days
Useful Temp. Range: -75°F to 400°F (-60°C to 205°C)

Cured Properties - MECHANICAL:

Hardness: 25 (Shore A)
Tensile Strength: 2.20 MPa (325 psi)
Elongation: 325%
Peel Strength: 3 kg/cm (15 lb/in)

Cured Properties - ELECTRICAL:

Volume Resistivity: 6 x 10¹⁴ ohm · cm
Dielectric Strength: 16 kV/mm (400 V/mil)
Dielectric Constant: 2.8 @ 60 Hz

Cured Properties - THERMAL:

Thermal Conductivity: 0.21 W/m · °K
Brittle Point: -60°C (-75°F)
Thermal Expansion: 27 x 10^-5 (°C)^-1

Other:

Viscosity (@ 25°C): 20,000 cps

Material Safety Data Sheet (MSDS)

* Please note: All aerosol cans & toxic/flammable chemicals can be shipped by GROUND carriers only!

1-Part Adhesive Sealant - RTV-118ML