DISCONTINUED - Standard Tip Conductive Pen

DISCONTINUED - See Similar Item 8420-P

The pen dispenser for drawing highly conductive silver traces, jumpers and shielding with precision and control

• Quickly creates conductive silver traces on most surfaces
• Valved pen tip for easy application
• Solderable at low temperatures
• Dries in minutes at room temperature

Applications:

• Repairs traces
• Links components
• Makes smooth jumpers
• Shields electronics

INSTRUCTIONS,

• clean surface to be repaired
• tap the top of the pen on a hard surface to free the mixing balls. Shake the pen vigorously for 20 seconds to mix the material
• practice with the pen before trying a repair. Press the pen lightly against surface to be repaired. Squeeze barrel firmly to start & regulate the flow.
• trace will become conductive in 5-10 minutes. Air cure is reached in 45 minutes; heat cure in 5 minutes at 250-300 deg F for maximum conductivity
• wipe pen tip clean after each use & replace the cap
• use item # CW3300 Overcoat Pen to insulate repaired trace and to repair any damaged solder mask

MSDS