Out of Stock
$499.00
$450.35
ET-7024 Ethernet I/O Module, 4 Analog Output, 5 Digital Input, 5 Digital Output
Item #ET-7024
Overview
ET-7024 Ethernet I/O Module, 4 Analog Output, 5 Digital Input, 5 Digital Output
The ET-7024 is a multifunction module includes 4 channels analog output, 5 channels digital input and 5 channels digital output. It provides a variety of programmable analog output options (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA), and each analog output can be programmed to accept either current or voltage as output depending upon the position of corresponding jumper. The ET-7024 is fully RoHS compliant and provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- I/O Pair Connection
- Built-in I/O
- AO: 4 Channels
- DI/Counter: 5 Channels
- DO: 5 Channels
Applications:
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Specifications
- Software
- Built-In Web Server Yes
- Web HMI Yes
- I/O Pair Connection Yes
- Communication
- Ethernet Port 1 x RJ-45, 10/100 Base-TX
- PoE -
- Protocol Modbus/TCP, Modbus/UDP
- Security ID, Password and IP Filter
- Dual Watchdog Yes, Module (0.8 second), Communication (Programmable)
- LED Indicators
- for System Running Yes
- for Ethernet Link/Act Yes
- for DI/DO status -
- for PoE Power -
- 2-Way Isolation
- Ethernet 1500 VDC
- I/O 2500 VDC
- EMS Protection
- ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
- EFT (IEC 61000-4-4) ±4 kV for Power Line
- Surge (IEC 61000-4-5) ±0.5 kV for Power Line
- Power Requirements
- Reverse Polarity Protection Yes
- Powered from Terminal Block 10 ~ 30 VDC
- Powered from PoE -
- Consumption 4.3 W (Max.)
- Mechanical
- Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
- Installation DIN-Rail or Wall mounting
- Environmental
- Operating Temperature -25 ~ +75°C
- Storage Temperature -30 ~ +80°C
- Humidity 10 ~ 90% RH, Non-condensing
I/O Specifications
- Analog Output
- Channels 4
- Type
- +0 VDC ~ +5 VDC, +/-5 VDC, +0 VDC ~ +10 VDC,
- +/-10 VDC,+0 mA ~ +20 mA, +4 mA ~ +20 mA
- (Jumper Selectable)
- Individual Channel Configuration Yes
- Resolution 12-bit
- Accuracy +/-0.1% of FSR
- Voltage Output Capability 10 V @ 20 mA
- Current Load Resistance 500 Ω
- Open Wire Detection Yes, for 4 ~ 20 mA only
- Power-on Value Yes, Programmable
- Safe Value Yes, Programmable
- Digital Input/Counter
- Channels 5
- Dry Contact (Source)
- On Voltage Level Close to GND
- Off Voltage Level Open
- Effective Distance for Dry Contact 500 Meters Max.
- Wet contact (Sink Source)
- On Voltage Level +1 VDC Max.
- Off Voltage Level +3.5 VDC ~ +30 VDC
- Input Impedance -
- Counters
- Channels 5
- Max. Count 4,294,967,295 (32-bit)
- Max. Input Frequency 100 Hz
- Min. Pulse Width 5 ms
- Overvoltage Protection 30 VDC
- Digital Output
- Channels 5
- Type Isolated Open Collector
- Sink/Source (NPN/PNP) Sink
- Max. Load Current 600 mA/Channel
- Load Voltage +5 VDC ~ +50 VDC
- Overvoltage Protection 60 VDC
- Overload Protection 1.4 A
- Short-circuit Protection Yes
- Power-on Value Yes, Programmable
- Safe Value Yes, Programmable