RF Field Strength Meter 2.9 GHz NOW ON SALE! $1599.00 (reg. $1995.00) WHILE SUPPLIES LAST !

Ships and supported from the USA

The UBA-9290 is a portable RF Field Strength Meter with spectrum capability. It is the ideal instrument for measuring RF signals within a frequency range of 100 kHz to 2.9 GHz. The UBA-9290 is designed for various applications related to the general analysis, maintenence and service of RF systems including cable tv, RFID, Telecommunications, TV cell phone equipment and WiFi. The low noise floor of -117 dBm allows the user to observe and analyze even weak signals. The UBA-9290's basic spectrum analyzer capabilities makes it well suited for many field applications, laboratory use and even on the production line. This is a cost effective and powerful tool for engineers, scientists and technicians involved in RF signal analysis available for a fraction of the cost for a full featured standard spectrum analyzer.

This Field Strength Meter features a user friendly interface making it quite easy to use. Settings and measurements are conveniently set and it also allows for 100 user defined presets such as predefined ranges or channel settings and other special functions that are frequently used in communication systems. This frequency analyzer supports high speed USB and ships with software that allows the user to control the UBA-2900 from a Personal Computer. Measurements may be stored on the P.C. for additional analysis.

UBA-9290 RF Field Strength Meter Features:

Handheld portable functionality
Battery operated
6 Ni-MH rechargeable batteries are included
Padded case with storage cells
100 kHz to 2.9 GHz measurement range: Span Range 1 MHz to 1 GHz.
320 x 240TFT Colour LCD Display.
Very High Sensitivity: -117 dBm
Integrated Frequency Counter. Range: 9MHz to 2.1 GHz
Modes: Spectrum Analyzer, Bar Graph (5/11/21/51/101/201 Channels, Single Bar, Difference)
Sweep Mode (Free Run, Single Run, Squelch Run)
Markers: 1,2, Delta, Peak, Center
Memory: 100 Waveforms / Settings
Manufactured in South Korea by UBINS
1 year limited warranty

General Specifications:

Frequency

Frequency Range: 100 kHz to 2900 MHz
Basic Accuracy: TXO: +/- 2.5 parts per million
Receiver sensitivity: 0 – 6 dBu EMF (S/N 10 dB @ W-FM, 12 dB @ N-FM)
Resolution: 5 kHz & multiples of 5kHz
Stepping range: Multiples of 5 kHz and 6.25 kHz
Span: 1 MHz to 1 GHz

Amplitude

Units: dBm, dBmV, dBuV
Ranges:
-32 to – 117 dBm (N-FM)
-22 to – 107 dBm (W-FM, AM, SSB)
Resolution: 0.1 dB
Accuracy: 2 dB (23°C +/- 3°C)
Bandwidth: N-FM: 12.5 kHz, W-FM: 180 kHz, AM/SSB: 2.4 kHz
Attenuator: 10, 20, 30 & 35 dBm
Spurious noise level: -45 dBc (N-FM), -35 dBc (W-FM)
Input impedance: 50 Ohms / 75 Ohms
Antenna/Input Connector: N-type female
Max input level: 10 dBm, 5 Vrms

Sweep

Speed: 500 milli seconds
Trigger source: N-FM, W-FM, SSB, AM
Trigger mode: Free, single, squelch, continuous
Marker mode: Off, 1, 2, delta, peak, center

Memory

Trace & setting storage: 100 waveforms and settings

Display

Type: TFT Color 320 x 240

Frequency Counter

Frequency Range: 9 MHz to 2100MHz
Connector: BNC female
Input Impedance: 50 Ohms
Resolution / # of Digits: 1 kHz, 7 digits
Accuracy: 50 ppm, +/- 1 count
Sampling Time: 512 ms
Input sensitivity:
150 mV ( 9 MHz – 2.1 GHz)
100 mV ( 20 MHz – 1.0 GHz)
Maximum input voltage: 5 Vrsm

Computer Interface

USB: Cable included

Audio

Output: 1 Watt into an 8 Ohm speaker

Power

Battery: 6 each AA-Type, Ni-MH 1.2V, 2.700 mAh, rechargeable batteries (included)
AC Power Adapter/Charger: 9 volts DC, Universal 100- 240VAC, 50-60Hz input

Environment

Operating Temperature: 0°C to 40°C
Relative humidity: 35 to 85%, non condensing
Storage temperature: -10°C to 50°C

Physical Specifications

Dimensions: 82mm x 20mm5 x 36 mm (3.2 x 8.1 x 1.4 inches)
Weight (w/o batteries): 395 grams (0.87 lbs)

Users Manual

Windows USB Drivers (32 & 64 Bit)

2.9 GHz RF Field Strength Meter