Skip to content
JYE Tech DSO150 Oscilloscope laying on a manual

DSO150 Oscilloscope - The Little Scope That Can

We recently were contacted to test a new oscilloscope product, the DSO150 shell. Upon reception, I really liked it and thought it would fit well into our market. After some research to get all the details behind the product, it turned out we had been shipped a counterfeit product.

We contacted JEYTech directly, and they graciously helped us become an authorized distributor. We are now proud to announce and sell the DSO150.

What is the DSO150 Oscilloscope Used For?

So what exactly can you do with this little oscilloscope? Well, you can visualize the voltage of any signal up to 200KHz, in the range of 25VDC and 50Vpk2pk. This includes everything from an audio signal to your AC mains with the proper equipment to diagnosing your output for that Arduino sketch you couldn't get to work. Even if you wanted to examine the signal noise on your power supply or other mains-connected device, it has AC coupling to strictly isolate the information you're looking for.


The electronic components of the JYE Tech DSO150 Oscilloscope

Whether a gift for your children, you're inexperienced with oscilloscopes, or a seasoned engineer; the DSO150 has some pretty packed features for a mere $40 retail. Pick up yours today!

Don't forget your power supply, or extra hardware to probe those higher voltages. Always remember to connect the probe ground to earth ground, never to neutral when probing AC mains. Proceed at your own risk, it can be fatal.


JYE Tech DSO150 Oscilloscope

DSO105 Specifications:

  • Vertical
    • Number of Channel: 1
    • Analog Bandwidth: 0 - 200KHz
    • Sensitivity: 5mV/Div - 20V/Div
    • Sensitivity error: < 5%
    • Resolution: 12-bit
    • Input Impedance: 1M ohm
    • Maximum Input voltage: 50Vpk2pk
    • Coupling: DC, AC, GND
  • Horizontal
    • Max Real-time Sampling Rate: 1Msps
    • Timebase: 10us/Div - 500s/Div
    • Record Length: 1024
  • Trigger
    • Trigger Modes: Auto, Normal, Single
    • Trigger Types: Rising/falling edge
    • Trigger Position: 1/2 of buffer size fixed
  • Display
    • 2.4-inch color TFT LCD with 320 x 240 resolution
  • Power Supply
    • 9V DC (8 - 10V acceptable)
    • Supply Current: 120mA @ 9V
  • Physical
    • Dimension: 115mm X 75mm X 22mm
    • Weight: 100 gram (not including cables and power supply)
Previous article PCBs Components for Electronics Hobbyists

Leave a comment

Comments must be approved before appearing

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare