Orders over $50 qualify for a free gift claim yours here after filling your shopping cart.

.032" 21 Guage 1/2lb SN99 Lead Free Solder - No Clean

Item no. 4901-227G

.032" 21 Guage 1/2lb SN99 Lead Free Solder - No Clean

Item no. 4901-227G
2 In stock

.032" 21 Guage 1/2lb SN99 Lead Free Solder - No Clean

99.3% tin and 0.7% copper

M.G. Chemicals no clean Lead-Free Solder was designed with Sn/Cu (Tin/Copper) alloys as a lead-free alternative for the standard Tin and Lead solder. These alloys conform to the impurity requirements of J-Std-006 and RoHS. Use this solder anywhere you would use normal solder.

Features / Benefits

Lead free
Complies with RoHS
Exceeds the impurity requirements of J-Std-006
No Clean flux
21 Gauge, 0.032" diameters
Excellent wettability
Hard non-conductive residues
Flux Percentage

M.G. Chemicals Lead Free Solder utilizes a state-of-the-art automatic wire extrusion and wire drawing machines to manufacture consistent solder. The introduction of flux core in the wire extrusion process involves constant monitoring of flux percentage to ensure minimal flux voids and irregular wire. Typical flux percentage for our Lead Free Solder is 2.0-4.0%.

Flux Core

A unique flux system was specifically used for high temperature lead free alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Utilizing synthetically refined resin and very effective activator that wets and spreads like an RA type. This special activator exhibits virtually no spattering. Activator conforms to J-STD-004, REL0. Cleaning Flux core is a no clean formulation therefore the residues do not need to be removed for typical applications.


  Test Method Specification
Cu content   0.3-0.7 %
Sn content   Balance
Flux Classification JSTD-004 REL0
Copper Mirror IPC-TM-650 2.3.32 No removal of copper film
Silver Chromate IPC-TM-650 2.3.33 Pass
Corrosion IPC-TM-650 2.6.15 Pass
SIR JSTD-004,Pattern Down IPC-TM-650 2.33 x 10 11 ohms
SIR Bellcore (Telecordia) Bellcore GR-78-CORE 13.1.3 6.12 x 10 11 ohms
Electromigration Bellcore GR-78-CORE 13.1.4 Pass
Post Reflow Flux Residue TGA Analysis 55%
Acid Value IPC-TM-650 2.3.13 190-210
Flux Residue Dryness IPC-TM-650 2.4.47 Pass
Spitting of Flux-Cored Solder IPC-TM-650 2.4.48 0.3%
Solder Spread IPC-TM-650 2.4.46 130 mm2


Lead free/leaded solder comparison Lead Free Solder (Sn/Cu) Sn63/Pb37 (Leaded Solder)
Melting Point 227º C (441º F) 183 º C (361.4 º F)
Wire Diameter 0.032” (0.81 mm) 0.032” (0.81 mm)
Std. Wire Gauge 21 21
Tolerance, in. +/- 0.002” +/- 0.002”
Hardness, Brinell 9HB 14HB
Coefficient of Thermal Expansion Pure Sn=23.5 24.7
Tensile Strength 3190 psi 4442 psi
Density 7.31 g/cc 8.42 g/cc
Electrical Resistivity 10 - 15 µohm-cm 14.5 µohm-cm
Electrical Conductivity 13 %IACS 11.9 %IACS
Yield Strength, psi 2180 3950
Total Elongation,% 39 48
Joint Shear Strength, at 0.1mm/min 20ºC 23 14
Creep Strength, N/mm2 at 0.1mm/min 20ºC 8.6 3.3
Creep Strength, N/mm2 at 0.1mm/min 100 C 2.1 1

Material Safety Data Sheet (MSDS) 

30 day satisfaction guarantee
Satisfaction Guarantee
Your satisfaction is important to us. If you're not satisfied, return the product within 30 days of purchase for a refund or credit.

Return policy
Free tech support
Free Tech Support
Circuit Specialists offers free technical support for the life of your product. Please call our technical team with any questions.

1-800-528-1417 ext. 3
Mon - Fri: 8:00 AM - 5 :00 PM (MST)

Some products must be specially ordered, usually resulting in a 1–2 business day delay. Please contact us for an estimated delivery date.