7-channel RTD Input Module

• I/O Type: 7 RTD
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Pt 100/1000, Ni, Balco 500
• Wiring burn-out detect function

The ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Multi input ranges are allowed in one module, creating a cost-effective solution. Most important of all, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire has been broken. It specifically aims at building and factory temperature monitoring applications.

Specifications

• Display
• LED Indicators: Status, Comm, Link, Speed
• Power Supply
• Power Requirement: 10~30 VDC
• Analog Input
• Direct Sensor Input: RTD (Pt, Balco, or Ni)
• Burn-out Detection: Yes
• Channel Independent Configuration: Yes
• Sampling Rates: 10 samples/second
• Resolution: 16-bit
• Channels: 7 (2 or 3-wired)
• Input Impedance: >10 MOhm
• Span Drift: ±25 ppm/°C
• Zero Drift: ±6 µV/°C
• General
• Watchdog Timer: System (1.6 second) & Communication (programmable)
• Temperature (Operating): -10~70 °C (14~158 °F)
• Humidity: 20~95 %RH
• Temperature (Storage): -20~80 °C (-4~176 °F)
• Interface: 10/100Base-T(X)
• Peer-to-Peer: Yes
• GCL: Yes
• Isolation Protection: 2000 VDC
• Communication Protocol: Modbus/TCP, TCP/IP, UDP, and HTTP
• Communication Speed: Ethernet 10/100Mbps
• Comm. Distance: Ethernet 100 m
• Connector: 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)

Manual

Spec Sheet