Banana Pi M2 Quad Core Single Board Computer with integrated WiFi & 2 dB Antenna

Quadcore single board computer with 1GB RAM and integrated 802.11 B/G/N WiFi. Includes a 2dB WiFi antenna, input for up to a 64 GB micro SD card, 40 PIN GPIO header, built in reset and power-on buttons, runs Android 4.4 smoothly, Debian Linux, Ubuntu Linux, Raspbian, and other images.

Visit our blog to learn more about setting up the Banana Pi M2 the Banana Pi BPI-M2 as a ADS-B radio receiver controller and using the Banana Pi M2 with a home weather station.

Hardware specifications:

CPU: A31S ARM Cortex-A7 quad-core,256 KB L1 cache 1 MB L2 cache
GPU: PowerVR SGX544MP2· Comply withOpenGL ES 2.0, OpenCL 1.x, DX 9_3
Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 64GB) / MMC card slot
Onboard Network: 10/100/1000 Ethernet RJ45, WIFI onboard
Video Input: A CSI input connector allows for the connectionof a designed camera module
Video Outputs: HDMI, LVDS/RGB
Audio Output: 3.5 mm Jack and HDMI
Power Source: 5 volt via DC Power Jack Female 4.0x1.7mm (DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports: 4
Buttons: Reset&Power button
GPIO(2X20) pin GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED: Power Key & RJ45
Remote: IR (Optional)
OS: Android and Linux etc. OS (Not Included)
Product size: 92 mm × 60mm
Weight: 48g
working temperature range: -15°C~75°C

Operating System files are available on the Banana Pi website here (Note: Select the BPI-M2 section for the correct OS files.)

Note: This unit is NOT compatible with our GFP151U-5VOLT power supply.

Now including a 2dB WiFi antenna

Banana Pi M2 Single-Board Computer