ITECH IT6322A 30V 6A Triple Channel Programmable DC power supply

The IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be setfrom 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channel, which offer multi-purpose solutions for customer test. The IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, the IT6300 series greatly enhances the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.

Features:

Triple output voltage, all are adjustable.
Optional serial/ parallel/ track mode
The voltage and current for each channel can be displayed at the same time
Small size of 1/2 2U
VFD display
Function keys with LED light
Adjust the digital step value via cursor
Output switch control
High accuracy, high resolution and high stability
Remote measurement function, compensation online pressure drop
Comprehensive protection function
Intelligent fan control, reduce noise
Built-in RS232/USB/GPIB communication interface for part of the models

Functional Advantage, Track mode

CH1 and CH2, CH2 and CH3, or all three channels can be set as track mode, if any one channel parameter changed, the corresponding parameters of the other channels will also change in direct proportion.

For example, set up voltage and current of CH1 and CH2 to be CH1:4V, 1A; CH2:8V, 2A. Set CH1 and CH2 in track mode, in output off and Meter state, VFD is shown below:

ITECH IT6332A
Output Ratings	voltage	0-30V x 2, 0-5V x 1
	current	0-6 A x 2, 0-3A x 1
	Voltage Limiting protection	0-31V x 2, 6 V x 1
Load Regulation	voltage	≤ 0.01% + 5 mV(*2)
	current	≤ 0.1% + 3 mA(*1)
Line Regulation	voltage	≤ 0.01% + 5 mV(2) ≤ 0.01% + 3 mV(1)
	current	≤ 0.1% + 3 mA
Setup Resolution	voltage	1mV
	current	1mA
Read Back Resolution	voltage
	current
Set up Accuracy	voltage	≤ 0.03% + 10 mV
	current	≤ 0.1% + 8 mA (2) ≤0.1 % + 5 mA (1)
Read Back Accuracy	voltage	≤ 0.03% + 10 mA
	current	≤ 0.1% + 8 mA (2) ≤0.1 % + 5 mA (1)
Ripple and noise	voltage	≤ 4 mVp-p
	current	≤ 5 mArms
Temp.coefficient	voltage	≤ 0.03 % + 10 mV
	current	≤ 0.1 % + 5 mA
Read back Temp.coefficient	voltage	≤ 0.03 % + 10 mV
	current	≤ 0.1 % + 5 mA
Serial synchronous operation	The cascade synchronization error	≤ 0.05 % + 10 mA

Serial parallel setting accuracy	voltage	≤ 0.02 % +5 mV
	current	≤ 0.1 % + 20m
Memory	Save / Recall	36 groups

Timer	Time setting	0.1 S-99999.9 S
	Resolution	0.1 s
	Function	Timer function for turning off the output
Dimension	WHD	214.5mm82mm453.1