PCB Fab-In-A-Box kit

The "PCB Fab-In-A-Box" kit comprises 3 basic "components".

Toner Transfer Paper	Blank PCB Laminate	Toner Reactive Foils

The first step in our process is to get your PCB design out of the printer via a special transfer medium coated with a special water-relase agent for perfect transfers when subjected to heat & pressure (from the laminator above). 10-sheet pack 2 packs in kit 8-1/2" x 11" Resealable bags Can NOT damage any laser printer or copier	Our high-quality laminate boards are made in the USA (Conneticut, OH) by skilled lamination experts. They are custom made for us using 1/2oz copper foil on a built-up .032" thick fiberglass FR4/G-10 base. 1x & 2x Copper 1/2oz Copper .032" thick Size: 8" x 10" 2 panels/pack (4 panels total)	The GreenTRF foil is fused over the transferred circuit image on the board to seal the toner from "etch through". The WhiteTRF is optional for a parts insertion "silk-screen" layer. Seals the toner Size: 8" x 15 feet 2 packages Green - etching White - silkscreen
Also included in the "Starter Kit" is a special custom printed page of circuit test images on a sheet of Toner Transfer Paper used for trouble-shooting if your printed images aren't transferring properly. Used as a reference to compare the quality of your printouts.
	This page of test circuit images is printed using a new "branded" toner cartridge for guaranteed known density of toner to make perfect transfers. For optimum performance, you never want to use an "after-market" toner cartridge. They are just inferrior to "branded" cartridges. Having good toner density is most important for proper transfers to the copper's surface. If you find your are having transfer problems, that's when you'd use one of these images. It will immediately point to the source of the problem... either your laser printer is not putting out enough toner density or the TIA laminator is not working properly. Click here to see the incredible level of detail you will be able to achieve!