
CSI-MOT-24 Stepper Motor Controller
Save 25%! Add to cart to see final price.
We're sorry, this item is discontinued.
For help finding an alternative product, please call 1-800-528-1417 or email sales@circuitspecialists.com and we'll be happy to assist.
Manuals, Datasheets, and Other Documents
CSI-MOT-24 Stepper Motor Controller
DC 12V 24V Reversible Stepper Motor Speed Controller Stepping Motor Speed Governor Pulse Signal Controller LED Display
Reversible Stepper Motor Speed Regulator Stepping Motor Speed Controller Governor Pulse Signal Controller LED Display
Features:
Input: DC 7.5-24V
Output frequency: 40-200KHZ
Control range of stepping motor speed: 0~998 rpm
Interface:
+24V input
+5V output
PUL
DIR
EN
GND
Introduction:
CSI-MOT-24 is a versatile testing unit that we found useful during troubleshooting and building prototypes that involve motor control. Due to the lack of information online, we want to provide the Makers community basic steps on how to wire up the CSI-MOT-24 with different motor drive module.
Wiring:
CSI-MOT-24 connect QJ-215 Stepper Motor Driver
- Connect VC+ and VC- on the CSI-MOT-24 to an 8V power supply.
- Connect CP and DIR on the CSI-MOT-24 to the CP and DIR on the stepper motor driver QJ-215 accordingly.
- Connect +5V on the CSI-MOT-24 to the +5V on the QJ-215 to power the driver.
- Connect the VCC and GND on the QJ-215 to a 13V power supply.
- Make sure to connect all ground wire accordingly. This is crucial for the system operational.
Conclusion:
CSI-MOT-24 is a versatile testing unit that we found useful during troubleshooting and building prototypes that involve motor control. This unit can also connect to DC motor driver and can be used as a servo motor testing. We will cover this in future projects.
Operation: