Specifications |
Aquisition |
Channel |
OSC+ DMM + AFG |
Bandwidth |
70MHz |
Sample Rate |
250MSa/s |
Mode |
Normal, Peak Detect, |
Average |
N acquisitions, all channels simultaneously, N is selectable from 1-128 |
Input |
Input Coupling |
DC, AC, GND |
Input Impedance |
Resistance: 1MΩ; Capacitance: 25pF |
Probe Attenuation Factors |
1X, 10X, 100X, 1000X |
Maximum Input Voltage |
200Vpk (DC + peak) |
Horizontal |
Scanning Speed Range(Sec/Div) |
5ns/div ~ 500S/div (1-2-5 sequences) |
Delay Time Accuracy |
±50ppm (any interval ≥1ms) |
Wave form Interpolation |
Step, Linear, Sin(x)/x |
Memory Depth(Sample Points) |
6k |
Vertical |
A/D converter |
8 bit resolution |
Vertical Scale(Volt/div) Range |
10mV ~ 10V/div @ x1 probe |
100mV ~ 100V/div @ x10 probe |
1V ~ 1000V/div @ x100 probe |
10V ~ 10KV/div @ x1000 probe |
Position Range |
±4division |
Selectable Analog Bandwidth Limit(typical) |
20MHz |
Lower Frequency Response(-3dB) |
≤ 10Hz (at input BNC) |
Rise Time at BNC(typical) |
≤7ns |
DC Gain Accuracy |
±3% |
Trigger |
Trigger Source |
Ch2, CH2 |
Trigger Mode |
Auto, Normal and Single |
Trigger Type |
Edge trigger, Alternate trigger |
Trigger Sensitivity |
0.02 div increments |
Trigger Level Range |
±4V |
Input |
Input Coupling |
DC, AC or GND |
Input Impedance, DC coupled |
1MΩ ±2% for 20pF ± 3 pF |
Probe Attenuation |
1X, 10X |
Max. Input Voltage |
CAT I and CAT II: Installation type: 300VRMS(10×) |
Signal Source Mode
|
Waveform Impedance |
DC~10MHz |
DAC Clock |
2K~100MHz adjustable |
Frequency Resolution |
0.1% |
Channel Count |
1CH Waveform Output |
Waveform Depth |
4KSa |
Waveform Range |
±3.5V Max. |
Meter Mode |
Maximum Resolution |
4,000 Counts |
DMM Testing Modes |
Voltage, Current, Resistance, Capacitance, Diode & Continuity |
Maximum Input Voltage |
AC: 400V, DC: 400V |
Maximum Input Current |
AC: 10A, DC: 10A |
Input Impedance |
40 MΩ |
Measurement |
Range |
Accuracy |
Resolution |
DC Voltage |
400.00mV |
± (0.8% + 5) |
100uV |
4.000V |
1mV |
40.00V |
10mV |
400.0V |
100mV |
600.0V |
± (1% + 2) |
1V |
Overload protection: 400mV: 250V, other: 600Vrms. |
AC Voltage |
4.000V |
± (1.2% + 5) |
1mV |
40.00V |
10mV |
400.0V |
100mV |
600.0V |
± (1% + 2) |
1V |
Frequency: 40Hz~400Hz; |
Frequency of 400V and 600V: 40Hz~100Hz |
DC Current |
40.00mA |
± (1% + 2) |
10uA |
200.0mA |
± (1.5% + 2) |
100uA |
4.000A |
± (1.8% + 2) |
1mA |
10.00A |
± (3% + 2) |
10mA |
Overload protection: |
self restoring fuse: 200mA/250V, 4A and 10A range no fuse. |
AC Current |
40.00mA |
± (1.3% + 2) |
10uA |
400.0mA |
± (1.8% + 2) |
100uA |
4.000A |
± (2% + 3) |
1mA |
10.00A |
± (3% + 5) |
10mA |
Frequency: 40Hz~400Hz |
self restoring fuse: 200mA/250V, 4A and 10A range no fuse. |
Resistance |
400.0Ω |
±(1% + 3) |
0.1Ω |
4.000KΩ |
±(1.2% + 5) |
1Ω |
60.00KΩ |
10Ω |
400.0KΩ |
100Ω |
4.000MΩ |
1KΩ |
40.00MΩ |
± (1.5%±3) |
10KΩ |
Overload protection: 220Vrms |
Capacitance |
40.00nF |
±(3% + 5) |
10pF |
400.0nF |
100pF |
4.000uF |
1nF |
40.00uF |
10nF |
100.0uF |
100nF |
Overload protection: 220Vrms |
Diode |
0V~2.0V |
On-Off |
<50Ω |
General Features
|
Display |
320*240 TFT LCD |
Interface |
USB Device |
Voltage |
DC Input: 5V, 5200mAh Lithium Battery |
Size |
7.83" x 3.86" 1.61" / 199 X 98 X 41 (mm) |
Weight |
10.85 oz / 0.3kg |
Included accessories |
2 oscilloscope probes 2 BNC to 2 alagator clip test lead sets 1 DMM test lead set 1 USB Charging/Data Cable 1 USB Charger (110V AC Input) 1 Users Manual/Support Software on CD-ROM
|