RBX01-PEI-R1 Robox ThermoSurface Print surface revision 1 replacement
Overview
RBX01-PEI-R1 Robox ThermoSurface™ Print surface revision 1 replacement
ThermoSurface™ is a high performance engineered thermoplastic. This bed surface bonds particularly well to molten ABS and PLA – important for holding the first layer to the bed. Once cooled the printed model will detatch with no mechanical aid required. Most plastics will stick very well to this surface and leave no residue for maintenance free printing. If cleaning is required or the first layer is not sticking this surface should be cleaned with IPA (isopropyl alcohol) or the cleaning wipes supplied with Robox.
This print surface is a simple retangular shape which is held in place by plastic clips around the edge of the bed frame. Older Robox versions use this design. If your existing bed has tabs around the edge please select the product RBX01-PEI instead.
Dimensions(mm): 209x150x1.05mm. ±0.05mm thickness per sheet, thickness across each individual sheet is within 0.01mm
Functions/Common uses:
- As a print surface for fused filament fabrication on Robox
- Removable for faster cooling
- Double sided
- Very low maintenance
A RBX1 Robox is required to use this module. Robox is not included and is sold separately. Some simple assembly is required.