0
Save $630.00 Free shipping

Siglent SDS2104X 100MHz 4 Ch Super Phosphor Oscilloscope

Item no. SDS2104X
Save $630.00 Free shipping

Siglent SDS2104X 100MHz 4 Ch Super Phosphor Oscilloscope

Item no. SDS2104X
$999.00 $1,629.00
Only 4 left

Siglent SDS2104X 100MHz 4 Ch Super Phosphor Oscilloscope

Regular Price:
    $1,629.00 
Promotional Price:
    $1140.30

Special Offer!! Purchase a SDS2000X series oscilloscope between January 1st, 2017
and June 1st, 2017 and receive 30% off the regular price.

*Please Note: This item is shipped from a seperate warehouse and could be shipped in a seperate package/shipment.

(the image shown is for ilustration only and the actual item may vary from the image shown.)

3 Year limited warranty

SIGLENT’s SDS22104X Super Phosphor Oscilloscope with a bandwidth of 100 MHz and features a maximum sample rate of 2 GSa/s, and a maximum record length of 140 Mpts. The most commonly used functions can be accessed with its user-friendly one-button design.

The SDS2104X employs a new generation of SPO technology. It has an innovative digital trigger system with high sensitivity and low jitter, and a maximum waveform capture rate of 140,000 wfm/s (normal mode), up to 500,000 wfm/s (sequence mode). It also employs the common 256-level intensity grading display function but also a color temperature display mode. The trigger system supports multiple powerful triggering modes including serial bus triggering, History waveform recording and sequence acquisition allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a built-in 25 MHz arbitrary waveform generator, 16 digital channels (MSO), as well as serial decoding are also features of the SDS2104X.

Features

  • 100 MHz
  • Real-time sampling rate up to 2 GSa/s
    • Waveform capture rate up to 140,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
    • Supports 256-level intensity grading and color temperature display
    • Record length up to 140 Mpts
    • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern and Video (HDTV supported)
  • Serial bus triggering and decoder, supports protocols IIC, SPI, UART, RS232, CAN and LIN (Optional)
  • Low background noise, supports 1 mV/div to 10 V/div voltage scales
  • 10 types of one-button shortcuts, including Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweeps, Zoom and Print
  • Segmented acquisition (Sequence) mode divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user. The resulting acquisition has a very small dead time segment.
  • History waveform record (History) function, the maximumr ecorded waveform length is 80,000 frames
  • Automatic measurement function on 37 parameters, supports statistics, Gating measurements, Math measurements, History measurements and Ref measurements
  • Math function (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
  • High Speed hardware based Pass/ Fail function
  • 16 Digital channels (MSO option), Maximum waveform capture rate up to 500 MSa/s, Record length up to 140 Mpt/CH
  • 25 MHz function/arbitrary waveform generator, built-in 10 types of waveforms (option)
  • Large 8 inch TFT-LCD display with 800 * 480 resolution
  • Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out
  • Supports SCPI remote control commands
  • Supports Multi-language display and embedded online Help

Characteristics

8 inch TFT-LCD Display and 10 One-button Menus

8-inch TFT-LCD display with 800 * 480 resolution
Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweeps, Zoom and Print

Waveform Capture Rate up to 500,000 wfm/s


With a waveform capture rate of up to 500,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or small probability events

Record Length of up to 140 Mpts

Using hardware-based Zoom technique and a record length of up to 140 Mpts, users are able to use a higher sampling rate to capture more of the signal, and then quickly zoom in to focus on the area of interest

256-level Intensity Grading and Color Temperature Display


SPO display technology is the result of high refresh rate and multi-frame superimposition. In the unit of time, the higher the probability of a pixel waveform appears, the brighter the pixel.

The degree of warm or cool of color suggests the probability of the appearing of waveform. The warmer the color, the higher the probability.

Variety of Trigger Functions


Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern, IIC, SPI, UART/RS232, LIN and CAN

History Mode


History function can record up to 80,000 frames of waveforms.
The recording is carried out automatically, so that the customer can play back the history waveforms at any time to observe unusual events, and locate the source quickly through the cursors or measurements.
Located on the keyboard Panel, this function is easily accessible

Sequence Mode


Segmented memory collection will store the waveform into multiple (up to 80,000) memory segments and each segment will store a triggered waveform, as well the dead time information. The dead time between segments can be as small as 2μs. All the segments can be played back using History function.

Comprehensive Statistical Functions


Parametric statistical functions to display 5 parameters for any set of measurements: current, mean, minimum value, maximum value, and standard deviation. The measurement count is also displayed. The maximum number of measurements that can be run and simultaneously analyzed statistically is five. Supports Gating measurements, Math measurement, History measurement and Ref measurement.

Advanced Math Function


In addition to the traditional (+, -, X, /) operations, FFT, integration, differential, and square root operations are supported. The integration operation supports gating, which uses cursors to define the domain of integration.

Eres Mode


Eres mode can improve the SNR effectively, without the dependence on the periodicity of signal and stable triggering

Hardware-Based High Speed Pass/Fail Function


Hardware-based Pass/Fail function performs up to 140,000 Pass / Fail decisions each second.
With easy-to-generate user-defined test templates, the SDS2000X compares the current measured trace to the template mask trace, making it suitable for long-term signal monitoring or automated testing.

Serial Bus Decoding Function (Optional)


Displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in table form.

Built-in 25MHz Function/Arbitrary Waveform Generator (Optional)


10 built-in waveforms plus 4 ARBs. The arbitrary waveforms can be accessed and edited by the EasyWave PC software

Complete Connectivity


USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out

Specifications

 
   

Acquire System

 
Sampling Rate 2GSa/s (single-channel[1]), 1GSa/s (dual-channel)
Memory Depth 140Mpts (single-channel), 70Mpts (dual-channel)
Peak Detect 1ns
Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024
Eres Enhance bits: 0.5, 1, 1.5, 2., 2.5, 3 selectable
Interpolation Sinx/x, Linear 
   

Input

 
Channel 4 + EXT
Coupling DC, AC, GND
Impedance DC: (1MΩ±2%) || (22pF ±3pF)
50Ω: 50Ω±2%
Max. Input voltage

1MΩ ≤400Vpk (DC + Peak AC <=10kHz)
50Ω ≤5Vrms

CH to CH Isolation DC~Max BW >35dB 
Probe Attenuation 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X, 20X, 50X, 100X, 200X, 500X, 1000X, 2000X, 5000X, 10000X 
   

Horizontal System

 
Time Scale 1.0ns/div ~ 50s/div
Channel Skew <100ps
Waveform Capture Rate Up to 140,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode)
Intensity grading 256-level
Display Format Y-T, X-Y, Roll
Time base Accuracy ±25ppm
Roll Mode 50ms/div ~ 50s/div (1-2-5 Step)
   

Vertical System

 
Bandwidth (-3dB) 100 MHz
Vertical Resolution 8 bit
Vertical Range 8 divisions
Vertical Scale (Probe 1X) 1mV/div - 10V/div (1-2-5 step)
Offset Range (Probe 1X) 1mV/div ~ 100mV/div: ±1V
102mV/div ~ 1V/div: ±10V
1.02V/div ~ 10V/div: ±100V
Bandwidth Limit 20MHz ±40% 
Bandwidth Flatness DC ~ 10%(BW): ±1dB
10% ~ 50%(BW): ±2dB
50% ~ 100%(BW): +2dB/-3dB
Low Frequency Response (AC Coupling -3dB) ≤10Hz (at input BNC)
Noise stdev ≤ 0.2 div (< 2mV/div)
stdev ≤ 0.5 div (≥ 2mV/div)
DC Gain Accuracy 5mV/div ~10V/div: ≤3.0%
≤2mV/div: ≤4.0%
Offset Accuracy ≥2mV/div: ±(1%*offset+1.5%*8*div+2mV)
<2mV/div: ±(1%* offset +1.5%*8*div+1mV)
Rise Time [1] (Typ.)<5.0ns (SDS2074X)
Overshoot (500ps Rise Edge)  <10%
   

Trigger System

 
Mode Auto, Normal, Single
Level Internal: ±4.5div from the center of the screen
EXT: ±0.6V
EXT/5: ±3V
Holdoff Range 100ns ~ 1.5s 
Coupling AC, DC, LFRJ, HFRJ, Noise RJ (CH1~CH4)
Coupling Frequency Response
(CH1~CH4)[2]
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8Hz
LFRJ: Attenuates the frequency components below 900kHz
HFRJ: Attenuates the frequency components above 500kHz
Coupling Frequency Response
(EXT) [2]
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8Hz
LFRJ: Attenuates the frequency components below 400kHz
HFRJ: Attenuates the frequency components above 1MHz
Accuracy[2] CH1 ~ CH4: ±0.2div
EXT: ±0.3div
Sensitivity CH1~ CH4: 0.6div
EXT: 200mVpp (DC~ 10MHz)
       300mVpp (10MHz~ BW)
EXT/5: 1Vpp (DC~ 10MHz)
       1.5Vpp (10MHz~ BW)
Jitter <100ps (CH1~ CH4)

Displacement

Pre-Trigger: 0 ~ 100% memory
Delay-Trigger: 0 ~ 2,000 div
Edge Trigger  
Slope Rising, Falling, Rising&Falling
Source CH1~CH4/EXT/(EXT/5)/AC Line
Slope Trigger  
Slope Rising, Falling
Limit Range <, >, < >, > <
Source CH1 ~ CH4
Time Range 2ns ~ 4.2s
Resolution 1ns

Pulse Width Trigger

 
Polarity +wid , -wid
Limit Range <, >, < >, > <
Source CH1~CH4
Pulse Width Range 2ns ~ 4.2s
Resolution 1ns

Video Trigger

 
Signal Standard NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom
Source CH1~CH4
Sync Any, Select
Trigger Condition Line, Field

Window Trigger

 
Window Type Absolute, Relative
Source CH1~CH4

Interval Trigger

 
Slope Rising, Falling
Limit Range <, >, < >, > <
Source CH1~CH4
Time Range 2ns ~ 4.2s
Resolution 1ns

Dropout Trigger

 
Timeout Type Edge, State
Source CH1~CH4
Slope Rising, Falling
Time Range 2ns ~ 4.2s
Resolution 1ns

Runt Trigger

 
Polarity +wid , -wid
Limit Range <, >, < >, > <
Source CH1~CH4
Time Range 2ns ~ 4.2s
Resolution 1ns

Pattern Trigger

 
Pattern Setting Invalid, Low, High
Logic AND, OR, NAND, NOR
Source CH1~CH4
Limit Range <, >, < >, > <
Time Range 2ns ~ 4.2s
Resolution 1ns
   

Serial Trigger

 

ITC Trigger

 
Condition Start, Stop, Restart, No Ack, EEPROM, Address&Data, Data Length
Source (SDA/SCL) CH1~CH4 
Data format  Hex
Limit Range EEPROM: =, >, <
Data Length

EEPROM: 1byte
Address&Data: 1~2byte
Data Length: 1~12byte

R/W bit Address&Data: Read, Write, Do not care

SPI Trigger

 
Condition Data
Source (CS/CLK/Data) CH1~CH4
Data format Binary 
Data Length 4 ~ 96 bit
Bit Value 0, 1, X
Bit Order  LSB, MSB

UART/RS232 Trigger

 
Condition Start, Stop, Data, Parity Error
Source (RX/TX) CH1~CH4
Data format Hex
Limit Range =, >, <
Data Length 1 byte 
Data Width 5 bit, 6 bit, 7 bit, 8 bit
Parity Check None, Odd, Even
Stop Bit 1 bit, 1.5 bit, 2 bit
Idle Level  High, Low
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s
Baud Rate (Custom) 300bit/s~334000bit/s

CAN Trigger

 
Type All, Remote, ID, ID+Data, Error
Source CH1~CH4
ID STD (11bit), EXT(29bit)
Data format Hex
Data Length 1~2byte
Baud Rate (Selectable) 5k/10k/20k/50k/100k/125k/250k/500k/800k/1M bit/s
Baud Rate (Custom) 5kbit/s~1Mbit/s

LIN Trigger

 
Type  Break, Frame ID, ID+Data, Error
Source CH1~CH4
ID  1byte
Data format Hex
Data Length 1~2byte
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s
Baud Rate (Custom) 300bit/s~20kbit/s 
   

Serial Decoder (Optional)

 
No. of Decoder

IIC Decoder

 
Signal SCL, SDA
Address 7bit, 10bit
Threshold -4.5~4.5div
List  1~7 Lines

SPI Decoder

 

Signal

CLK, MISO, MOSI, CS 
Edge Select Rising, Falling
Idle Level Low, High 
Bit Order MSB, LSB
Threshold -4.5~4.5 div
List 1 ~ 7 lines

UART/ RS232 Decoder

 

Signal

RX, TX
Data Width 5 bit, 6 bit, 7 bit, 8 bit 
Parity Check None, Odd, Even
Stop Bit 1 bit, 1.5 bit, 2 bit
Idle Level Low, High
Threshold -4.5~4.5 div
List 1 ~ 7 lines 

CAN Decoder

 

Signal

CAN_H, CAN_L
Source CAN_H, CAN_L, CAN_H-CAN_L
Threshold  -4.5~4.5 div
List 1 ~ 7 lines

LIN Decoder

 

LIN Specification Package Revision 

Ver1.3, Ver2.0
Threshold -4.5 ~ 4.5 div

List

1 ~ 7 lines
   

Measurement

 

Source

CH1~CH4, Math, Ref, History
No. of Measurements Display 5 measurements at the same time
Range Screen, Gating

Measurement Parameters (37 Types)

Vertical (Voltage)  

 

 

              
Vmax Highest value in input waveform
Vmin Lowest value in input waveform

Vpp

Difference between maximum and minimum data values
Vamp Difference between top and base in a bimodal signal, or between max and min in an unimodal
signal
Vtop Value of most probable higher state in a bimodal waveform
Vbase Value of most probable lower state in a bimodal waveform
Mean Average of all data values
Vmean Average of data values in the first cycle
stdev Standard deviation of all data values 
Vstd Standard deviation of all data values in the first cycle 
Vrms Root mean square of all data values
Crms Root mean square of all data values in the first cycle 
FOV Overshoot after a falling edge; (base-min)/Amplitude
FPRE Overshoot before a falling edge; (max-top)/Amplitude
ROV Overshoot after a rising edge; (max-top)/Amplitude
RPRE Overshoot before a rising edge; (base-min)/Amplitude
Level@X  The voltage value of the trigger point  
Horizontal (Time)          

Period

Period for every cycle in waveform at the 50% level, and positive slope 
Freq Frequency for every cycle in waveform at the 50% level, and positive slope 
+Wid Width measured at 50% level and positive slope 
-Wid Width measured at 50% level and negative slope 
Rise Time Duration of rising edge from 10-90% 
Fall Time Duration of falling edge from 90-10% 
Bwid Time from the first rising edge to the last falling edge, or the first falling edge to the last rising
edge at the 50% crossing 
+Dut Ratio of positive width to period 
-Dut Ratio of negative width to period 
Delay Time from the trigger to the first transition at the 50% crossing 
Time@Level  Time from trigger of each transition at a specific level and slope
Delay

Phase

Calculate the phase difference between two edges 
FRR Time between the first rising edges of the two channels 
FRF Time from the first rising edge of channel A, to the first falling edge of channel B 
FFR Time from the first falling edge of channel A, to the first rising edge of channel B 
FFF Time from the first falling edge of channel A, to the first falling edge of channel B 
LRR Time from the first rising edge of channel A, to the last rising edge of channel B 
LRF Time from the first rising edge of channel A, to the last falling edge of channel B 
LFR Time from the first falling edge of channel A, to the last rising edge of channel B 
LFF Time from the first falling edge of channel A, to the last falling edge of channel B 
Cursors

Manual : Time X1, X2, (X1-X2), (1/ΔT)
              Voltage Y1, Y2, (Y1-Y2
Track: Time X1, X2, (X1-X2) 

Statistics Current, Mean, Min, Max, Std-Dev, Count 
Counter ±1Hz counter error 
    

Math

  

Operation

+, -, *, /, FFT, d/dt, ∫dt, square root  
FFT Window Rectangular, Blackman, Hanning, Hamming  
FFT Display  Full Screen, Split  
    

Built-in Function/Arbitrary Waveform Generator (Optional)

  

Channel

1  
Max. Output Frequency 25MHz   
Sampling Rate 125 MSa/s   
Frequency Resolution 1 μHz   
Frequency Accuracy ±50 ppm   
Vertical Resolution 14 bits   
Amplitude Range 2mVpp ~ 3Vpp (into 50Ω)
4mVpp ~ 6Vpp (into HiZ)
Waveforms Sine, Square, Ramp, Pulse, DC, Noise, Cardiac, Gaus Pulse, Exp Rise, Exp Fall, Arb  
Output Impedance 50Ω±2%  
Protection  Short-Circuit Protection

Sine

  

Frequency

1μHz ~ 25MHz
Offset Accuracy (100 kHz) ±(0.3dB* offset setting value +1mVpp)  
Amplitude Flatness
(Compare to 100 kHz, 5Vpp) 
±0.3 dB  
SFDR

DC ~ 1 MHz -60dBc
1 MHz ~ 5 MHz -55dBc
5 MHz ~ 25 MHz -50dBc

HD 

DC-5 MHz -50dBc
5 MHz - 25MHz -45dBc  

Square/Pulse

  
Frequency 1μHz ~ 10MHz
Duty Cycle  20% ~ 80%  
Rise/Fall time  < 24 ns (10% ~ 90%)  
Overshoot  < 3% (typical, 1KHz, 1Vpp)
Pulse Width  > 50ns  
Jitter (Cycle to Cycle)  < 500ps + 10ppm  

Ramp

  

Frequency

1μHz ~ 300kHz
Linearity (Typical) < 0.1% of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100% Symmetry)  
Symmetry 0% ~ 100%  

DC

  

Offset range

±1.5V (into 50Ω)
±3 V (into HiZ)
Accuracy  ±(|offset|*1%+3 mV)  

Noise

  

Bandwidth

>25MHz (-3dB)  
    

Digital Channels

  

No. of Channels

16
Max. Sampling Rate  500MSa/s  
Memory Depth 14Mpts/CH  
Min. Detectable Pulse Width 4ns   
Level Group D0~D7,D8~D15  
Level Range -3V~3V   
Logic Type TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom 
Skew[2]  D0~D15: ±1 sampling interval
Digital to Analog: ± (1 sampling interval +1ns)
   

I/O 

  

Standard

USB Host, USB Device, LAN, Pass/Fail, Trigger Out  
Pass/Fail  3.3V TTL Output  
    

Display

  

Display Type

8-inch TFT LCD
Resolution 800×480  
Color 24 bit  
Contrast 500:1   
Backlight 300nit  
Range  8 x 14 divisions  
    

Waveform Display

  

Type

Dot, Vector  
Persistence Time OFF, 1s, 5s, 10s, 30s, infinite  
Color Display Normal, Color  
Screen Saver  1min, 5min, 10min, 30min, 1hour, OFF  
    

Language

  

Language

Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, Russian, Italian, Portuguese
    

Environments

  

Temperature Operating:

10°C ~ 40°C  
Non-operating: -20°C ~ 60°C  
Humidity Operating: 85%RH, 40°C , 24 hours  
Non-operating: 85%RH, 65°C , 24 hours   
Altitude Operating: ≤3,000m  
Non-operating: ≤15,266m  
Electromagnetic Compatibility

2004/108/EC
Execution Standard EN 61326-1:2006 
EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008

Safety 2006/95/EC
Execution Standard EN 61010-1:2010/EN 61010-2-030:2010
    

Power Supply

  

Input Voltage & Frequency

100 ~ 240 Vrms 50/60Hz
100 ~ 120 Vrms 400Hz
Power 60W Max   
    

Mechanical

  
Dimensions Length* Width*Height = 352mm*128mm*224mm  

Weight

N.W 3.4 Kg(2-ch); 3.6 Kg(4-ch)
G.W 4.9 Kg(2-ch); 5.2 Kg(4-ch)  
    
Note[1]

Single-channel: one channel in CH1/CH2 (or CH3/CH4) is ON and another is OFF
Dual-channel: both channels in CH1/CH2 (or CH3/CH4) are ON

Note[2] Typical Value refers to the tested value under specific conditions. It might vary with the ambient temperature or other conditions

SDS2000X Series Users Manual 

30 day satisfaction guarantee
Satisfaction Guarantee
Your satisfaction is important to us. If you're not satisfied, return the product within 30 days of purchase for a refund or credit.

Return policy
Three year warranty
Limited Warranty
Circuit Specialists wants you to be happy with your purchase. This product comes with a three-year limited warranty.

Warranty policy
Free tech support
Free Tech Support
Circuit Specialists offers free technical support for the life of your product. Please call our technical team with any questions.

1-800-528-1417 ext. 3
Mon - Fri: 8:00 AM - 5 :00 PM (MST)

Expected delivery within 3-7 business days after shipping. Free shipping offer applies only to orders that weigh under 150 lbs. Offer limited to the contiguous U.S. Certain exclusions and limitations may apply. Circuit Specialists reserves the right to modify or discontinue any offer at any time.

Some products must be specially ordered, usually resulting in a 1–2 business day delay. Please contact us for an estimated delivery date.