Siglent SHS1202X 200 MHz Isolated 2 channel Oscilloscope

Special Order - Approx. Lead time 8 weeks.

The Siglent SHS1202X features full isolation between the two oscilloscope channels, one multimeter channel, power adapter and the USB host/device port. The full isolation makes it ideal for both laboratory and floating signal measurement because it reduces the risk of accidental short circuits.

The SHS1202X integrates a 6000 count digital multimeter, isolated from the scope that can measure DC/AC Voltage, DC/A C Current, Resistance, Capacitance, Diodes, and Continuity.

A rechargeable 6900 mAh lithium battery supports up to 4 hours of work without a charge.

This handheld oscilloscope features a sealed IP51 dust and drip proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.

Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
Integrated oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
200 MHz bandwidth
Sample rate of 1 GSa/s (single-channel)/500 MSa/s (two-channels)
Record length up to 12 Mpts.
Hardware-based true RMS multimeter
IP51 dust/water resistance certified

Bandwidth	200 MHz
Sample rate (Max.)	Two-channel share a single 1 GSa/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel is active, that channel has a sample rate of 1 GSa/s
Channels	2 analog oscilloscope channels, 1 multimeter channel
Memory depth (Max.)	6 Mpts/CH (dual-channel mode) 12 Mpts/CH (single channel mode)
Waveform capture rate (Max.)	100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Trigger type	Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Serial Trigger and decoder	IIC, SPI, UART, CAN, LIN
Data Logger(Recorder)	Sample Logger. The Max sample rate is 25 kSa/s, the Min sample rate is 1 Sa/s
Data Logger(Recorder)	Measurement Logger. The Max interval is 10 minutes, the Min interval is 0.1second. The Max items of logging is 4
I/O	USB Host, USB Device
Max input Voltage (Scope)	CAT III 600 Vrms, CAT II 1000 Vrms Between BNC Signal and Protecting Earth CAT III 600 Vrms, CAT II 1000 Vrms Between BNC GND and Protecting Earth CAT III 300 Vrms Between BNC Signal and BNC GND
Max input Voltage (Meter)	CAT III 600 Vrms, CAT II 1000 Vrms
Probe	PB925
Display	5.6-inch TFT-LCD (640x480)
Weight	Without package 3.89 Lbs (1.75 kg.) With package 7.71 Lbs (3.5 kg)