Siglent SDS2102X-PLUS 100MHz 2 Channel Digital Storage Oscilloscope

SIGLENT’s SDS2102X Plus Digital Storage Oscilloscope has a bandwidth of 100 MHz, a maximum sample rate of 2 GSa/s, a maximum record length of 200 Mpts/ch, and 2 analog channels + 16 digital channels with mixed signal analysis ability.

The SDS2102X Plus employs SIGLENT’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2102X Plus. A 10-bit acquisition mode helps to satisfy applications which require more than 8-bit resolution.

The large 10.1’’ capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2102X Plus.

Key Features

100 MHz with real-time sample rate up to 2 GSa/s. A 350 MHz bandwidth upgrade option is available.
SPO technology
- Waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color temperature display modes
- Record length up to 200 Mpts/ch, 400 Mpts in total for all 4 channels
- Digital trigger system
Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced triggering
Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN (Standard) and CAN FD, FlexRay, I2S, and MIL-STD-1553B (optional) protocols
Low background noise, features 0.5 mV/div to 10 V/div voltage scales
10-bit mode provides higher resolution and lower noise
Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 90,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
History waveform record (History) function for up to 90,000 triggered waveforms (frames)
Automatic measurement function on 50+ parameters, supports statistics with histogram and trend
Two Math traces, support 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor
Abundant data processing and analysis functions such as Search, Navigate, Mask Test, Bode plot, Power Analysis (optional) and Counter
16 digital channels (optional)
Built-in 50 MHz waveform generator (optional)
Large 10.1” TFT-LCD display with 1024×600 resolution; Capacitive touch screen supports multi-touch gestures
Multiple interfaces: USB Host, USB Device (USBTMC), LAN?VXI-11/Telnet/Socket?, Pass/Fail, Trigger Out
Built-in web server supports remote control by the LAN port using a web browser; Supports SCPI remote control commands

Bandwidth	Channels	Real time sampling rate	Capture rate	Memory depth
100 MHz	2+EXT	2 GSa/s	120,000 wfm/s	200 Mpts/ch